Fiddes Hard Wax Oil
1L £25.50
2½L £44.00
A blend of natural oils & waxes offering exceptional
durability & resistance for internal natural wood flooring, kitchen worktops
(wood) and areas subjected to a high degree of wear.
Produces a quick drying, natural satin / matt water repellent,
tread-fast finish that will not peel or flake. To maintain / renovate, simply
wash, buff or re-apply, following the guidelines below.
Suitable for application onto children’s toys – EN 71-Toy
Safety Test
Resistant to liquids: Tested in accordance with BS 3900
G5
Resistant to wear: Tested in accordance with BS3900 E15
Preparation
Ensure all surfaces are clean, dry, and free from any previous
finish. Sand the substrate with a fine 150 grade sanding paper or 150 grit
sanding disk, removing all traces of dust.
Application
Ensure all areas to be
coated are extremely well ventilated during and after application. Always test
on a small area prior to initial application. No primer required. Maximum 2
coats recommended. Apply at room temperature. Fiddes Hard Wax Oil is formulated
for application directly, and does not require thinning.
First Coat - Stir contents thoroughly before and during use, and
apply in a warm, well ventilated room. Apply THINLY using a good quality bristle
or synthetic brush and lay EVENLEY, following the direction of the grain. Remove
any surplus material immediately with a cloth, carefully checking all areas for
any excess application. Leave to dry 4-6 hours in warm, dry well ventilated
conditions, or preferably overnight.
Second Coat - Apply as first coat,
THINLY, allowing good ventilation. Leave to dry 4-6 hours in warm, dry well
ventilated conditions, or preferably overnight.
When the surface area is
completely dry, a light buff will further enhance the sheen level.
| Notes: |
|
•
|
Ensure all areas to be coated are extremely well
ventilated during and after application has occurred.
|
|
•
|
Always test on a small area prior to major
application.
|
|
•
|
Certain dense or oily substrates may only require
a single application, and subsequently buffed to achieve the desired
finish.
|
|
•
|
Longer drying periods may occur during
application in cold, damp or humid conditions.
|
|
•
|
Always apply sparingly and remove any excess product
thoroughly.
|
|
•
|
Re-Application: To renovate previous application of Fiddes Hard
Wax Oil, lightly sand area with 150 grit sandpaper, and re-apply
sparingly.
|
|
In the Kitchen 
